Asus A7M266-D 4.4.1Chip Configuration, NOTE:, NOTE:, NOTE:, SDRAM CAS Latency, SDRAM Configuration, SDRAM Configuration, SDRAM Configuration, SDRAM RAS to CAS Delay

4.BIOS SETUP

4.4.1Chip Configuration

SDRAM Configuration [By SPD]

This sets the optimal timings for SDRAM related fields, depending on the memory modules that you are using. Default setting is [By SPD], which configures the subsequent 3 items by reading the contents in the SPD (Se- rial Presence Detect) device. The EEPROM on the memory module stores critical parameter information about the module, such as memory type, size, speed, voltage interface, and module banks. Configuration options: [By SPD][User Define]

SDRAM CAS Latency

This controls the latency between the SDRAM read command and the time that the data actually becomes available. NOTE: This field will only be adjustable when SDRAM Configuration is set to [User Define].

SDRAM RAS Precharge Time

This controls the idle clocks after issuing a precharge command to the SDRAM. NOTE: This field will only be adjustable when SDRAM Configuration is set to [User Define].

SDRAM RAS to CAS Delay

This controls the latency between the SDRAM active command and the read/write command. NOTE: This field will only be adjustable when SDRAM Configuration is set to [User Define].

AGP 4X Supported [Enabled]

This feature allows the CPU to write directly to the AGP card for up to 30% performance gain over standard AGP 4X mode. Configuration options: [En- abled] [Disabled]

4. BIOS SETUP

Chip Configuration

ASUS A7M266-D User’s Manual 57