Full Screen Logo [Enabled]

When [Enabled], MyLogo is displayed instead of the POST messages. Setting to [Disabled] displays the normal POST messages. Configuration options: [Disabled] [Enabled]

Make sure that the above item is set to [Enabled] if you wish to use the ASUS MyLogo2 feature. See MyLogo2 details on page 3-8.

AddOn ROM Display Mode [Force BIOS]

This field sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current]

Bootup Num-Lock [On]

This field selects the power-on state for the NumLock key. Configuration options: [Off] [On]

PS/2 Mouse Support [Enabled]

This sets the PS/2 mouse support. Configuration options: [Disabled] [Enabled]

Typematic Rate [Fast]

This field configures the typematic rate of the keyboard. Configuration options: [Slow] [Fast]

System Keyboard [Present]

This allows you to enable or disable all the keyboards attached to the system. Configuration options: [Absent] [Present]

Parity Check [Disabled]

This field enables or disables the memory or parity error checking feature. Configuration options: [Disabled] [Enabled]

Boot to OS/2 [No]

This field sets compatibility mode to OS/2 operating system. Configuration options: [No] [Yes]

Wait for ‘F1’ If Error [Enabled]

This field sets whether to wait for F1 key to be pressed if an error occurs. Configuration options: [Disabled] [Enabled]

Hit ‘Del’ Message Display [Disabled]

This field toggles the display of “Press DEL to run Setup”. Configuration options: [Disabled] [Enabled]

Interrupt 19 Capture [Disabled]

When [Enabled], it allows option ROMs to trap interrupt 19. This is required by some PCI cards that provide a ROM based setup utility. Configuration options: [Disabled] [Enabled]

2-18

Chapter 2: BIOS information