If you selected the option to update the BIOS from a file, a window pops up prompting you to locate the file. Select the file, click Save, then follow the screen instructions to complete the update process.

ASUS MyLogo2™

The ASUS MyLogo2™ is automatically installed when you install the ASUS Update utility from the software menu. See page 3-7 for installation of ASUS Update.

Before using ASUS MyLogo2 feature, use the AFUDOS utility to make a copy of your original BIOS file, or obtain the latest BIOS version from the ASUS website.

Make sure that the BIOS item Full Screen Logo is set to [Enabled] if you wish to use ASUS MyLogo2. See details on page 2-18.

Follow these steps to use ASUS MyLogo2.1.Launch the ASUS Update utility. See page 3-7 “ASUS Update”.

2.When prompted for the BIOS update method, select the option “Update BIOS from a file.”

3.Specify the location of the BIOS file, such as from a floppy disk. Click Next.

4.From the selection that appears, choose a logo image. Click Next.

If you wish, you may create your own boot logo image in GIF, JPG, or BMP file formats.

3-8

Chapter 3: Software support