3.HARDWARE SETUP
8)IDE Activity LED (2 pin IDELED)This connector supplies power to the cabinet’s IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors cause the IDE LED to light up.
| IDELED |
| |
TIP: If the | |
light, try reversing the |
.3 H/WConnectors SETUP
9)Floppy Disk Drive ConnectorThis connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged).
NOTE: Orient the red markings on the floppy ribbon cable to PIN 1
PIN 1
32 | ASUS |