4. BIOS SETUP
SDRAM Active to Precharge Time [6T]To make changes to this field, set the SDRAM Configuration field to [User Defined]. Configuration options: [6T] [5T]
Bank Interleave [Auto]Configuration options: [None] [2 Banks] [4 Banks] [Auto]
DRAM 4K/8K Page Enable [Auto]Configuration options: [Auto] [4K page enable] [8K page enable]
DDR_1T/2T_ITEM [2T CMD]Configuration options: [1T CMD] [2T CMD] [Auto Mode]
Burst Len [Auto]The DRAM burst length supports 8QW and 4QW. The default [Auto] detects the appropriate setting. Configuration options: [Auto] [4]
Read Around Write [Enabled]Setting this field to [Enabled] allows the memory controller to store write data in its buffer whenever the CPU issues a write command. The next time the CPU needs the data, it retrieves the data from the memory buffer without accessing the SDRAM. Configuration options: [Disabled] [Enabled]
Delayed Transaction [Disabled]When set to [Enabled], this feature frees the PCI bus when the CPU is accessing
Configuration options: [Always Prefetch] [Prefetch disabled] [Prefetch only enhance command]
AGP Capability [Auto]This motherboard supports the AGP 4x interface that transfers video data at 1066MB/s. When set to [1X Mode], the AGP interface only provides a peak data throughput of 266MB/s even if you are using an AGP 2x/4x card. When set to [2X Mode], the AGP interface only provides a peak data throughput of 533MB/s even if you are using an AGP 4x card. Configuration options: [1X Mode] [2X Mode] [4X Mode] [Auto]
AGP Fast Write [Disabled]Configuration options: [Disabled] [Enabled]
Chip Configuration
4. BIOS SETUP
ASUS | 59 |