6.CPU, Power and Chassis Fan Connectors (3-pin CPU_FAN, PWR_FAN, CHA_FAN)

The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors!

 

CPU_FAN

 

Rotation +12V GND

 

PWR_FAN

 

Rotation

 

+12V

 

GND

A8V

CHA_FAN

 

GND

A8V Deluxe

+12V

Rotation

12-Volt Fan Connectors

 

7. Serial Port 2 connector (10-1 pin COM2)

This connector accommodates a serial port using a serial port bracket. Connect the bracket cable to this connector then install the bracket into a slot opening at the back of the system chassis.

COM2

PIN 1

A8V

A8V Deluxe

Serial COM2 Bracket

The serial port bracket is purchased separately.

2-26

Chapter 2: Hardware information