Memory Configuration

 

Memclock Mode

[Auto]

DRAM Over 4G Remapping

[Disabled]

Bank Interleaving

[Disabled]

Node Interleaving

[Disabled]

Burst Length

[8 Beats]

CAS Latency (CL)

[Auto]

TRC

[Auto]

TRFC

[Auto]

TRCD

[Auto]

TWR

[Auto]

TRWT

[Auto]

TRAS

[Auto]

TRP

[Auto]

TWCL

[Auto]

AsyncLat

[Auto]

Read Preamble Setting

[Auto]

2T Command

[Auto]

MEMCLK can be set by the code using AUTO, or if you use LIMIT, you can set one of the standard values.

Memclock Mode [ Auto]

Allows you to set the memory clock mode. Set by thecode using [Auto] or select [Manual] to set using one of the standard values. Configuration options: [Auto] [Limit]

DRAM Over 4G Remapping [Disabled]

Enable this item when 4 gigabytes or more DRAM is installed to remap the memory block just below 4G and move it above 4G.

Configuration options: [Disabled] [Enabled]

Bank Interleaving [Disabled]

Sets whether to allow memory accesses to be spread out over BANKS on the same node or across nodes, decreasing access contention. Configuration options: [Auto] [Enabled] [Disabled]

Node Interleaving [Disabled]

Sets whether to allow memory accesses to be spread out over BANKS on the same node or across nodes, decreasing access contention. Configuration options: [Auto] [Disabled]

Burst Length [8 Beats]

Sets the burst length in beats. Set to 4 Beats when using 64-bit Dq. Configuration options: [8 Beats] [4 Beats]

CAS Latency (CL) [Auto]

Sets the CAS Latency. Configuration options: [Auto] [2.0] [3.0] [2.5]

TRC [Auto]

Sets the TRC.

Configuration options: [Auto] [7 CLK] [8 CLK] [9 CLK] [10 CLK] [11 CLK] [12 CLK] [13 CLK]

ASUS A8V Deluxe motherboard

4-17