8.ATX power connectors (20-pin ATXPWR, 4-pin ATX12V)

These connectors are for ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

In addition to the 20-pin ATX power connector, this motherboard requires that you connect the 4-pin ATX +12V power plug to provide sufficient power to the CPU.

•Do not forget to connect the 4-pin ATX +12V power plug. Otherwise, the system does not boot up.

•Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 300W, or 350W for a fully configured system. The system may become unstable or might not boot up, if the power is inadequate.

ATXPWR

ATX12V

+3.3VDC

 

 

 

 

 

 

 

 

 

 

 

 

 

+3.3VDC

GND

 

 

 

 

 

 

 

 

GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-12.0VDC

 

 

 

 

 

 

 

 

 

 

+3.3VDC

+12V DC

 

 

 

 

 

 

 

 

 

+12V DC

COM

 

 

 

 

 

 

 

 

 

 

 

COM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PS_ON#

+5.0VDC

 

COM

COM

 

COM

+5.0VDC

 

COM

COM

 

-5.0VDC

PWR_OK

 

+5.0VDC

+5VSB

A8V

+5.0VDC

+12.0VDC

A8V Deluxe ATX Power Connectors

ASUS A8V Deluxe motherboard

2-27