AGP Mode [AGP 8X]

Allows you to set the data throughput of your AGP graphics card. This motherboard supports the AGP 8X interface that transfers video data at 2.12GB/s. The default and configuration options vary depending on the speed of AGP card you installed. If you installed an AGP 8X graphics card, the configuration options are as follows: [8X] [4X] or if you installed an AGP 4X graphics card, the configuration options are as follows: [4X] [2X].

AGP Fast Write [Enabled]

Enables or disables the AGP Fast Write feature.

Configuration options: [Disabled] [Enabled]

Graphics Aperture Size [64MB]

Allows you to select the size of mapped memory for AGP graphic data. Configuration options: [32MB] [64MB] [128MB] [256MB]

AGP 3.0 Calibration Cycle [Disabled]

Enables or disables the AGP 3.0 Calibration cycle.

Configuration options: [Disabled] [Enabled]

DBI Output for AGP Trans [Disabled]

Enables or disables the DBI Output for AGP trans.

Configuration options: [Disabled] [Enabled]

SouthBridge Configuration

The items in this menu allows you to change the Southbridge-related features. Select an item then press <Enter> to display the configuration options.

MPS

Revision

[1.4]

PCI

Delay Transaction

[Disabled]

MPS Revision [1.4]

Sets the MPS revision value. Configuration options: [1.1] [1.4]

PCI Delay Transaction [Disabled]

Enables or disables the PCI Delay transaction feature.

Configuration options: [Disabled] [Enabled]

4-22

Chapter 4: BIOS Setup