2.3Motherboard installation
This section only describes how to install a supported motherboard into the AK35 chassis kit. Refer to the motherboard user guide for instructions on installing specific motherboard components.
2.3.1 Motherboard dimensions
This chassis kit supports an ASUS motherboard that measures 12x13 inches (30.5 x 33 cm) for SCSI models, or 12x12 inches (30.5 x 30.5 cm) for IDE models. Motherboards of smaller sizes will fit into the system chassis. Refer to the motherboard user guide for more information on the system requirements.
12 in (30.5 cm)
13 in (33 cm)
Make sure that the motherboard you intend to install into the chassis does not exceed the maximum specified dimensions. Otherwise, it will not fit into the chassis.
Chapter 2: Hardware setup |