2.3.2 Placement direction and screw holes
Align the holes on the motherboard (indicated by white circles in the picture below) to the corresponding standoffs on the motherboard metal plate inside the chassis.
Place screws through the designated holes to secure the motherboard to the chassis. Refer to the motherboard user guide for the specific number of screws that you need to use.
Place this side (with I/O ports) to the rear side of the chassis
The following figure shows the specific locations of the standoffs (indicated by black circles) inside the chassis. These standoffs should match with the holes on the motherboard as pointed out above.
Metal plate
Standoff
ASUS AK35 chassis kit |