2.7Removable components

When installing or removing system devices, you may need to remove previously installed components. This section describes how to remove these components.

2.7.1 HDD blower

To remove the HDD blower:

1.Disconnect the 3-pin HDD blower cable from the FAN 1 connector on the SCSI backplane.

1

2.Press the tab at the bottom of the blower to release it from the chassis.

3.Pull out the HDD blower.

HDD blower cable

HDD blower

3

2

Blower tab

HDD blower

2-20

Chapter 2: Hardware setup