2.5Expansion slot

2.5.1Installing an expansion card

The barebone server comes with a riser card bracket. You need to remove the bracket if you wish to install a PCI-X expansion card.

To install a PCI-X card:

1.Use a Phillips (cross) screwdriver to remove the screw that secures the riser card to the standoff.

Riser card screw

Riser card standoff

2.Firmly hold a riser card bracket, then pull it up to detach it from the PCI-X slot on the motherboard.

3.Remove the screw that secures the slot metal cover.

4.Install a PCI-X card to the bracket as shown, then secure

the card with a screw.

ASUS AP1600R-E2 (BA2)

2 - 11