2 . VGA Graphics controller setting (3-pin VGA_EN1)

These jumpers allow you to enable or disable the onboard ATI Rage XL video graphics controller. Set to pins 1-2 to enable the video graphics controller.

NCLV-D

 

VGA_EN1

 

1

 

 

2

2

 

 

3

NCLV-D VGA Setting

Enable

Disable

(Default)

 

3 . USB device wake-up (3-pin USBPW12, USBPW34)

Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode).

NCLV-D

USBPW12

1

2

2

3

 

 

 

 

 

+5V +5VSB (Default)

USBPW34

1

2

2

3

 

 

 

 

 

+5V +5VSB (Default)

NCLV-D USB device wake-up

• The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up.

•The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.

ASUS AP1600R-E2 (BA2)

4 - 5