To install an optical drive:

1.From the front panel, insert the rear end of the optical drive into the 5.25-inch drive bay.

2.Place the metal bracket parallel to the side of the optical drive, matching its two pegs with the lower holes, and the bracket holes with the standoffs on the base of the chassis.

The metal bracket should fit completely to ensure that the optical drive is securely in place.

Drive holes to match the

pegs on the metal bracket

Drive metal bracket

Bracke t pegs

Holes to match the standoffs

Standoffs to match the holes on the metal bracket

3.Secure the bracket with two screws.

2 - 18

Chapter 2: Hardware setup