4 . Keyboard power (3-pin KBPWR1)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS.

NCLV-D

KBPWR1

1

2

2

3

 

 

 

 

 

+5V +5VSB (Default)

NCLV-D Keyboard power setting

5 . Gigabit LAN controller setting (3-pin LAN_EN1)

These jumpers allow you to enable or disable the onboard Broadcom BCM5721 Gigabit LAN controller. Set to pins 1-2 to activate the Gigabit LAN feature.

NCLV-D

LAN_EN1

2

1

3

2

 

 

 

 

 

Enable Disable (Default)

NCLV-D LAN_EN1 setting

4 - 6

Chapter 4: Motherboard information