1.6LED information

The barebone system comes with five LED indicators. Refer to the following table for the LED status description.

Power LED (blue)

HDD Access LED (green)

! Message LED (red)

Drive status LED (green/red)

Drive activity LED

LED

Icon

Display status

Description

 

 

 

 

System

 

 

 

Power LED

 

ON

System power ON

 

 

Blinking

Suspend mode

HDD Access LED

 

OFF

No activity

 

 

Blinking

Read/write data into the HDD

Message LED

!

OFF

System is normal; no incoming event

 

 

Blinking

ASMS indicates a HW monitor event

 

 

 

 

Hard disk drives

 

 

 

Drive Status LED

 

Green

Bridge board connected to backplane

 

 

 

Installed HDD is in good condition

 

 

Red

HDD failure

 

 

Red-Blinking

HDD rebuilding using the RAID card

 

 

 

SAF-TE* function

Drive Activity LED

 

Blinking

Read/write data into the HDD

 

 

 

 

*SCSI Access Fault-Tolerant Enclosure

The Power, HDD Access, and Message LEDs are visible even if the system front bezel is closed.

1-8

Chapter 1: Product introduction