Make sure that you have applied the thermal grease to the top of the CPU before installing the heatsink and fan!

To install the CPU heatsink and fan:

1.Place the heatsink with fan assembly on top of the installed CPU1. Make sure it fits the screw holes of the heatsink bracket at the bottom of the CPU socket.

2.Use a Phillips screwdriver to tighten all four screws enough to secure the heatsink in place.

Take caution in tightening screws. Do not over-tighten screws, doing so may damage the motherboard!

TIP: Follow the sequence shown: half-tighten the screw on one corner of the heatsink and fan, then the next screw on the other corner and so on, making a cross pattern. Repeat until all four screws are tightened properly.

23

41

Make sure heatsink with fan assembly is mounted properly on the CPU to avoid burning the CPU and/or CPU socket!

2-8

Chapter 2: Hardware setup