2.3.2ASMB3-SOL PLUS firmware update

1.Repeat the step 1-4 in the previous sub-section.

2.On reboot, the main menu appears.Select ASMB3-SOL PLUS Firmware Update, and press <Enter> to enter the sub-menu.

ASUS Server RS162-E4/RX4 System

FreeDOS command prompt

ESB2 ASF Firmware Update

ESB2 IPMI Firmware Update

ASMB3-SOL PLUS Firmware Update

Configure BMC IP Source Static IP

Configure BMC IP Source DHCP

3.A screen appears, showing the current (if any) firmware version, and the new firmware version. The screen also displays a confirmation message asking whether or not you want to update the firmware appears. Press <Y> to update.

Current Firmware Version : 2.01 (RS162-E4/RX4)

Update Firmware Version : 2.02 (RS162-E4/RX4)

Do you want to update firmware (y/n)?

The firmware updating process starts.

Current Firmware Version : 2.01 (RS162-E4/RX4)

Update Firmware Version : 2.02 (RS162-E4/RX4)

Do you want to update firmware (y/n)?

Now, Starting to update firmware

Detect Flash Type = 2168

Programming Flash ...

Progress : 100

Initial BMC. Please wait..

Wait BMC ready.

Initial BMC O.K.

Update firmware Finish!

Detect MotherBoard -> (RS162-E4/RX4)

Detect KCS Interface

Size of SDR is 3584 bytes enter update mode

Clear SDR ? (Y/N) Clear SDR. Loading SDR

SDR Loaded ! Exit update mode

Press any key to continue . . ._

4.When the update is complete, turn off the system and unplug the AC power cord for 5 seconds before restarting the system.

2-6

Chapter 2: Installation