2.4.2Phoenix BIOS setup

Console Redirection setup

To adjust the Console Redirection settings:

1.Restart the remote server, then press <Del> during POST to access the BIOS setup.

2.Go to the Server menu, select the Console Redirection sub-menu, then press <Enter>.

3.Set the following sub-menu items:

•Com Port Address to [On-board COM B] or [On-board COM2 port]

•Baudrate to [57.6K]

•Console Type to [VT-UTF8]

•Flow Control to [CTS/RTS]

•Console connection to [Direct]

•Continue C.R. after POST to [On]*

•# of Pages to Support to [1]

* Set to [On] if you use Console Redirection in DOS mode; set to [Off] if you use Console Redirection in the console mode of Linux or Windows® OS.

PhoenixBIOS Setup Utility

 

Main Advanced

Server

Security

Boot

Exit

 

 

 

 

 

Console Redirection

 

 

Item Specific Help

 

 

 

 

 

 

 

 

 

 

Com Port Address

 

 

[On-board COM B]

If enabled, it will use a

 

 

 

port on the motherboard.

 

Baud Rate

 

 

 

[57.6K]

 

 

 

 

Console Type

 

 

 

[VT-UTF8]

 

 

 

 

Flow Control

 

 

 

[CTS/RTS]

 

 

 

 

Console Redirection

[Direct]

 

 

 

 

Continue C.R. after POST

[On]

 

 

 

 

 

# of video pages to support

[1]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1 Help

↑↓

Select Item

-/+

Change Values

F9

Setup Defaults

 

ESC: Exit

→←

Select Menu

Enter

Select

Sub-menu

F10

Save and Exit

 

 

 

 

 

 

 

 

 

 

4.Press <Esc>, then select IPMI Configuration sub-menu from the Server menu.

5.Use this sub-menu to adjust the remote server LAN settings or view the System Event Log (SEL).

6.When finished, press <F10> to save your changes and exit the BIOS setup.

ASUS ASMB3-SOL PLUS

2-13