6.Line In port (light blue). This port connects to the tape, CD, DVD player, or other audio sources.

7.Line Out port (lime). This port connects to a headphone or a speaker. In the 4, 6, and

8-channel configurations, the function of this port becomes Front Speaker Out.

8.Microphone port (pink). This port connects to a microphone.

Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, or 8-channel configuration.

Audio 2, 4, 6, or 8-channel configuration

Port

Headset 2-channel

4-channel

6-channel

8-channel

Light Blue (Rear panel)

Line In

Rear Speaker Out

Rear Speaker Out

Rear Speaker Out

Lime (Rear panel)

Line Out

Front Speaker Out

Front Speaker Out

Front Speaker Out

Pink (Rear panel)

Mic In

Mic In

Bass/Center

Bass/Center

Lime (Front panel)

–

–

–

Side Speaker Out

To configure an 8-channel audio output:

Use a chassis with HD audio module in the front panel to support 8-channel audio output.

9.USB 3.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for USB 3.0 devices.

10.eSATA port. This port connects to an external Serial ATA hard disk drive.

11.USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0 devices.

12.DVI-D port. This port is for any DVI-D compatible device and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.

13.HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected content.

14.PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.

15.DC power port (for AT5IONT-I DELUXE only). This port connects to an DC power adapter.

1-9

Chapter 1: Product introduction