7.System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.

F_PANEL

AT5IONT-I DELUXE

PWR LED PWR BTN

GND PWR PLED- PLED+

Reset

Ground

IDE_LED-

IDE_LED+

PIN 1

HD_LED RESET

AT5IONT-I DELUXE System panel connector•System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•Hard disk drive activity LED (2-pin HD_LED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HD LED lights up or flashes when data is read from or written to the HDD.

•ATX power button/soft-off button (2-pin PWRBTN) This 2-pin connector is for the system power button.

•Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.

8.SATA power connectors (4-pin SATA_PWR1) (for AT5IONT-I DELUXE only)

This connectors is for SATA power cable. The power cable plug is designed to fit this connector in only one orientation. Find the proper orientation and push down firmly until the connector completely fit.

AT5IONT-I DELUXE

AT5IONT-I DELUXE SATA power connector

1-13

Chapter 1: Product introduction