![](/images/new-backgrounds/1306866/30686663x1.webp)
2.3.1System Time [xx:xx:xx]
Allows you to set the system time.
2.3.2System Date [Day xx/xx/xxxx]
Allows you to set the system date.
2.3.3SATA 1/2
While entering Setup, the BIOS automatically detects the presence of SATA devices. There is a separate
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART Monitoring). These values are not
Type [Auto]
Selects the type of SATA drive. Setting to Auto allows automatic selection of the appropriate SATA device type. Select CDROM if you are specifically configuring a
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) Mode [Auto]
Enables or disables data
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables
Chapter 2: BIOS information
12/22/09 5:56:14 PM