Chapter 3 - Configuration

3. Configuration

In an Internet browser, enter the WAN IP address that you got either via the DHCP server or the IVR). You will be taken to the AX-112’s web configuration page, which consists of five menu items for future settings.

3. 1 Status

In this page, you will see all the system status including WAN port status, IP/MAC address, system uptime and firmware version.

3. 2 WAN

You can either choose to statically configure or to dynamically configure the WAN interface (via a DHCP server on the network, or via PPP if you are using PPPoE),

If you wish to statically assign the WAN

interface settings: enter the IP address, the subnet mask, the default gateway IP address, and the DNS server IP address. It is also recommended that the network domain name be provided as well, to ensure correct DNS operation. Press “Apply” to save and apply the new settings.

3.2.1 NTP server

To automatically obtain the time via the NTP server:

1.Enter����� the��� NTP��� server������ address������� for��� the��� �������network ���(if ����this �������address is�� ����left blank,������ a� default public NTP server will be used, if accessible);

2.Select����� the��� time���� zone;������ and���

3.Press the “Apply” button to save and apply the new settings.

English

AX-112 Analog Telephone Adapter

13