English

Chapter 3 - Configuration

3.2.2 MAC spoofing

This field allows the user to set the Ethernet hardware/MAC address to be used by the WAN interface. This is typically done to mimic (‘spoof’ or ‘clone’) the MAC address of one of the devices connected to the private LAN interface. To do this, follow these steps:

1.Enter����� the��� 12�� digits������ hardware�������� address������� ��to assign������ ��to the��� WAN��� interface;���������� ���and

2.Press the “Apply” button to save and apply the new settings.

3.3 SIP

3.3.1 SIP proxy server

Enter the SIP server’s address and port value. The address may either be an IP address or the server’s name. If you wish to specify a special SIP domain name, you may enter the domain name here. If no domain name is entered, the SIP domain name will be set to that of the network (i.e. that which is obtained via DHCP, or specified on the LAN settings page).

Select whether or not to send a Registration Request to the SIP server by assigning a value (in seconds) for the “Registration Expiration”. Enter the line phone number, the Caller-ID Name, the signaling port value, the authentication username and the password.

There are two groups of SIP server IP and account data fields for user to enter, AX-112 will try to register with the first one and if the first registration failed, it will try the second SIP server IP, if you have entered the configuration data. If both of the SIP servers IP failed to register, you will hear a busy tone when you pick up the phone-set. Otherwise, you will hear a normal dialing tone if the registration is successful.

3.3.2 Outbound proxy

If you need to use outbound proxy, assign the outbound proxy server IP and its port number.

14

AX-112 Analog Telephone Adapter