Asus B1M manual Using Display by Client mode, Select Display by Client mode

DRAFT 2 12/17/12

DRAFT 2 12/17/12

Using Display by Client mode

1.Connect the Wi-Fi dongle to your LED projector to launch the Media Center.

NOTE: If the Media Center does not automatically launch, press then select EZLINK-WIFI

2.Select Display by Client mode.

3.Press to scroll up or to scroll down the list of available

Wi-Fi hotspots then press to select the Wi-Fi hotspot you would like to connect to.

4.Press to launch the onscreen display menu’s keyboard. Refer to the control panel grid when navigating the keyboard to input the Wi-Fi hotspot’s password.

5.Press OK to start the Wi-Fi connection between the Wi-Fi hotspot and your LED projector.

6.Repeat the same steps under Using Display by AP mode to connect input devices to the LED projector.

54 LED projector E-Manual