Advanced features of the wireless LAN interface can be configured in this section.
Settings can be configured for the following—
•AP Isolation—if you select enable, then each of your wireless clients will not be able to communicate with each other.
•Band—a default setting at 2.4GHz – 802.11g
•Channel-- 802.11b and 802.11g use channels to limit interference from other devices. If you are experiencing interference with another 2.4Ghz device such as a baby monitor, security alarm, or cordless phone, then change the channel on your router.
•Multicast Rate—the rate at which a message is sent to a specified group of recipients.
•Basic Rate—the set of data transfer rates that all the stations will be capable of using to receive frames from a wireless medium.
•Fragmentation Threshold—used to fragment packets which help improve performance in the presence of radio frequency (RF) interference.
•RTS Threshold (Request to Send Threshold)—determines the packet size of a transmission through the use of the router to help control traffic flow.
•DTIM Interval—sets the Wake-up interval for clients in power-saving mode.
•Beacon Interval—a packet of information that is sent from a connected device to all other devices where it announces its availability and readiness. A beacon interval is a period of time (sent with the beacon) before sending the beacon again. The beacon interval may be adjusted in milliseconds (ms).
ASUS 4-Port Wireless Ethernet Router | 46 |
User Manual |
Version 1.0 | |
Document #: BD-AU0014-10 | |
