3.HARDWARE SETUP

3)USB Device Wake-up (3-pin USB01_PWR/USB23_PWR/USB45_PWR) These jumpers allow you to enable or disable the USB wake-up feature on the motherboard. Set all the three jumpers to ENABLED if you wish to use the USB devices to wake up the computer. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead. The default setting for all three jumpers is DISABLED .

NOTES:

1.Before setting these jumpers to ENABLED, make sure that you have the appropriate power supply, otherwise the computer does not power up.

2.The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal working conditions or in sleep mode.

USB01_PWR

1

2

2

3

(Disable) (Enable)

1

2

2

3

CUV266-DLS

USB45_PWR

 

USB23_PWR

(Disable) (Enable)

CUV266-DLS USB Device Wake-Up

4)Keyboard Wake-up (3-pin KB_PWR)

This jumper allows you to enable or disable the keyboard wake up feature. Set this jumper to ENABLED if you wish to use the keyboard to wake up the computer when you press the<Spacebar>. This feature requires an ATX power supply that can supply at least 1A on the +5Vsb lead. This default setting is

DISABLED.

1

KB_PWR

1

2

2

3

 

 

 

 

 

(Enable) (Disable)

CUV266-DLS

CUV266-DLS Keyboard Power Up

Motherboard Settings

3. H/W SETUP

ASUS CUV266-DLS User’s Manual

19