3. HARDWARE SETUP

The following 20-pin PANEL illustration is for items 14-19.

1

1

CUV266-DLS

CUV266-DLS System Panel Connectors

Keyboard Lock

Speaker

Power LED

 

Connector

Keylock Ground

 

Ground Ground Speaker

PLED+

PLED-

+5V

 

MLED+ MLED-

ExtSMI# Ground PWR GND

Reset Ground

MessageLED

 

 

Reset SW

 

ATX Power

SMI Lead

 

 

Switch*

*Requires an ATX power supply.

.3 H/WConnectors SETUP

14)System Power LED Lead (3-1 pin PWR.LED)

This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power, and blinks when the system is in sleep or soft-off mode.

15)System Warning Speaker Lead (4-pin SPEAKER)

This 4-pin connector connects to the case-mounted speaker and allows you to hear system beeps and warnings.

16)System Message LED Lead (2-pin MSG.LED)

This 2-pin connector is for the system message LED that indicates receipt of messages from a fax/modem. The normal status for this LED is ON, when there is no incoming data signal. The LED blinks when data is received. The system message LED feature requires an ACPI OS and driver support.

17)System Management Interrupt Lead (2-pin SMI)

This 2-pin connector allows you to manually place the system into a suspend mode, or “Green” mode, where system activity is instantly decreased to save power and to expand the life of system components. Attach the case-mounted suspend switch to this 2-pin connector.

18)ATX Power Switch / Soft-Off Switch Lead (2-pin PWR.SW)

The system power is controlled by a momentary switch attached to this connector. Pressing the button switches the system between ON and SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the button while in the ON mode for more than 4 seconds turns the system off.

19)Reset Switch Lead (2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for rebooting the system without turning off the power switch.

42

ASUS CUV266-DLS User’s Manual