Asus DSBV-D manual 104

SYSTEM1/2 Target Temperature

Allows you to set the target sytem temperature at which the system fan will start running if the fan is not yet turned on.

Configuration options: [39]~[60]

FBD_FAN1 Speed, VCORE0/1 Voltage, VTT, +1.5V, +1.8V, +3V, +12V, +5V, +5VSB, VBAT

These fields show the auto-detected values and are not user-configurable.

The following screens appear when you install Intel® 5300 series CPU.

					PhoenixBIOS Setup Utility
		Advanced
				Hardware Monitor					Item Specific Help
CPU1		Temperature			39oC/102oF				Full fan speed will
CPU2		Temperature			29oC/84oF				be started when the
SYSTEM1 Temperature					39oC/102oF				temperature reaches the
SYSTEM2 Temperature					29oC/84oF				selected target value.
CPU_FAN1 Speed					2925 RPM
CPU_FAN2 Speed					N/A
FRN_FAN1 Speed					N/A
FRN_FAN2 Speed					N/A
FRN_FAN3 Speed					N/A
FRN_FAN4 Speed					N/A
REAR_FAN1 Speed					N/A
REAR_FAN2 Speed					N/A
Smart Fan Control					[Smart Fan II]
F1	Help		↑↓	Select Item	-/+	Change Values			F9	Setup Defaults
ESC	Exit		→←	Select Menu	Enter	Select		Sub-Menu	F10	Save and Exit
Scroll down to display more items:
					PhoenixBIOS Setup Utility
		Advanced
				Hardware Monitor					Item Specific Help
CPU1 Target Temperature					[060]				Full fan speed will
CPU2 Target Temperature					[060]				be started when the
SYSTEM1 Target Temperature					[050]				temperature reaches the
SYSTEM2 Target Temperature					[050]				selected target value.
FBD_FAN1 Speed					N/A
VCORE0 Voltage					1.25		V
VCORE1 Voltage					1.25		V
VTT					1.21		V
+1.5V					1.56		V
+1.8V					1.79		V
+3V					3.28		V
+12V					11.91 V
+5V					4.87		V
+5VSB					4.96		V
VBAT					3.10		V
F1	Help		↑↓	Select Item	-/+	Change Values			F9	Setup Defaults
ESC	Exit		→←	Select Menu	Enter	Select		Sub-Menu	F10	Save and Exit

4-36 Chapter 4: BIOS setup