6.Before installing the motherboard into the chassis, locate the standoffs

that should match the eight (8) CEK spring screw holes.

Standoffs for CPU1

Standoffs for CPU2

7.Install the motherboard with the external I/O ports toward the chassis rear panel. The CPU sockets should be right on top of their respective standoffs.

Socket for CPU2

Socket for CPU1

Make sure that the standoffs perfectly match the CEK spring screw holes; otherwise, you can not install the CPU heatsinks properly.

8.Secure the motherboard with six (6) screws. Refer to section “2.2.2 Screw holes” for illustration.

ASUS DSBV-D

2-