2.4.6Installing the optional MemCool FB-DIMM fan

The FB-DIMMs generate heat during continued operation. To ensure optimum thermal condition and performance, install the optional MemCool FB-DIMM fan.

To install the optional FB-DIMM fan:

1.Locate the three FB-DIMM fan holes on the motherboard.

2.Disengage the fan top cover from the gripping the top cover by the clamps to top cover carefully until it separates

Do not remove the fan from the fan base.

3.Position the fan base over the

DIMMs, and insert the fan base legs into the FB-DIMM holes until the legs are securely in place.

• For instructional purposes only, no FB-DIMM is installed on any of the slots.

• For 2U or above models, we suggest you to install MemCool FB-DIMM fan for better cooling effect and system performance.

2-20

Chapter 2: Hardware information