5.USB connector (10-1 pin USB34)

This connector is for USB 2.0 ports. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 480 Mbps connection speed.

DSBV-D

DSBV-D USB connector

PowerPortB(USBUSBGNDNC )-PortB(+ )

USB34

PIN1

Power)-)PortA(+GND

PortA(USBUSB

The USB port module is purchased separately.

6.Serial port connector (10-1 pin COM2)

This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.

DSBV-D

COM2

PIN1

DSBV-D Serial port connectors

The serial port module is purchased separately.

2-36

Chapter 2: Hardware information