Manuals / Brands / Computer Equipment / Switch / Asus / Computer Equipment / Switch

Asus E1816 Trunking Status, 4.7.3 Bandwidth, Apply, Reload, Figure 4.20. Bandwidth Configuration (GigaX 1024P)

1 44

Download 44 pages, 2.5 Mb

Link aggregation creates new virtual links with more bandwidth. For example, port 1 and 2 can work together as one link to another device. The new virtual link has 200Mbps bandwidth. The switch provides 8 groups (GigaX 1024P) or 7 groups (GigaX 1024I) of link aggregations shown above.

Click on the Reload button to retrieve the configuration from switch.The checked trunk group means this group has been activated. You can check the trunk group to enable new trunk or uncheck the trunk group to disable the trunks. Click on Apply to make them effective in the switch.

The Trunking Status shows the ports work as trunk ports currently. A green light in the port means the port is working as trunk port properly, otherwise it shows no light.

4.7.3 Bandwidth

Figure 4.20. Bandwidth Configuration (GigaX 1024P)

GigaX Smart Switch Centralized Network Management

Contents

E1816 / Oct Copyright Information Limitation of Liability Product Contact Information ASUSTeK COMPUTER INC. (Asia-Pacific) Technical Support ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Germany & Austria) Table of Contents Copyright Information Product Contact Information 1 Introduction 2 Getting to Know the GigaX Smart Switch 1 Introduction 1.2 Using this Document 1.2.1 Notational conventions 2.1 Parts List 2.2 GigaX Smart Switch Features 2.3 Technical Specifications Physical Dimensions: Environmental Ranges 2.4 Front Panel 2.5 Rear Panel 3 Quick Start Guide 3.1 Part 1 — Connecting the Hardware 3.1.1 Installing the Switch on a Flat Surface 3.1.2 Mounting the Switch in a Rack 3.2 Part 2 —Startthe Switch 3.2.1 Step 1. Connect to the PC with CNM Installed 3.2.2 Step 2. Connect to computers or a LAN 3.2.3 Step 3. Attach the power cord LED Indicators 3.3 Management from CNM 3.3.1 Switch Discovery and Management Page Discovery Figure 3.3 Available Switches (GigaX 1024P) Figure 3.3.1 Available Switches (GigaX 1024I) 3.3.2 Password Recovery 3.3.3 Factory Default Setting 4 Management Functions 4.1 Start CNM Program 4.2 Functional Layout Figure 4.3 A Topology Frame Figure 4.4 Tree view of the network topology 4.3 General Settings for CNM 4.3.1 Topology Add Switch Figure 4.6 Add Switch (GigaX 1024P) Figure 4.6.1 Add Switch (GigaX 1024I) 4.3.2 Setup 4.4 Switch Topology 4.4.1 Topology Discovery 4.4.2 Switch Add and Removal 4.4.3 Topology Load and Save 4.5 Switch Setup 4.6 System 4.6.1 Reboot 4.6.2 Link Status Reload 4.6.3 Change Password 4.6.4 Load 4.6.5 Save 4.6.6 Apply and Save 4.7 Configuration 4.7.1 Physical Interface Figure 4.18.1 Physical Interface (GigaX 1024I) Config Reload 4.7.2 Link Aggregation Trunking Status 4.7.3 Bandwidth Page 4.7.4 Traffic Control 4.7.5 VLAN Setup Page Control Option Figure 4.22 VLAN Control Options 4.7.6 IGMP Snooping 4.7.7 QoS Setup Page 4.8 Statistics 4.8.1 Port Traffic Setup Draw Traffic Chart 4.8.2 Traffic History 4.8.3 Comparison