Manuals / Brands / Computer Equipment / Switch / Asus / Computer Equipment / Switch

Asus E1816 Control Option, Figure 4.22 VLAN Control Options

1 44

Download 44 pages, 2.5 Mb

All VLAN behavior will be influenced by VLAN control option. Click Control Option and a window will appear as shown as below. Enable or disable these options carefully, these options are global setting for VLAN

Figure 4.22 VLAN Control Options

7.VLAN function: enable or disable the VLAN function.

8.Unicast packet inter-VLAN leaky: to enable the packet to be forwarded to a destination port (L2 table hit) at different VLAN.

9.ARP broadcast packet inter-VLAN leaky: to enable ARP frame to broadcast to all switch ports.

10.IP multicast packet inter-VLAN leaky: to enable IP multicast packet to be flooded to all the multicast address group member set ignore the VLAN member set domain limitation.

11.802.1Q VLAN tag aware: to enable tag-based VLAN function.

12.Ingress rule for acceptable frame types: to admit all frames or to admin only VLAN-tagged frames.

13.Ingress rule for ingress filtering: to enable filter the frame received from a port which port is not included in the classified VLAN group member.

GigaX Smart Switch Centralized Network Management

37

Contents

E1816 / Oct Copyright Information Limitation of Liability Product Contact Information ASUSTeK COMPUTER INC. (Asia-Pacific) Technical Support ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Germany & Austria) Table of Contents Copyright Information Product Contact Information 1 Introduction 2 Getting to Know the GigaX Smart Switch 1 Introduction 1.2 Using this Document 1.2.1 Notational conventions 2.1 Parts List 2.2 GigaX Smart Switch Features 2.3 Technical Specifications Physical Dimensions: Environmental Ranges 2.4 Front Panel 2.5 Rear Panel 3 Quick Start Guide 3.1 Part 1 — Connecting the Hardware 3.1.1 Installing the Switch on a Flat Surface 3.1.2 Mounting the Switch in a Rack 3.2 Part 2 —Startthe Switch 3.2.1 Step 1. Connect to the PC with CNM Installed 3.2.2 Step 2. Connect to computers or a LAN 3.2.3 Step 3. Attach the power cord LED Indicators 3.3 Management from CNM 3.3.1 Switch Discovery and Management Page Discovery Figure 3.3 Available Switches (GigaX 1024P) Figure 3.3.1 Available Switches (GigaX 1024I) 3.3.2 Password Recovery 3.3.3 Factory Default Setting 4 Management Functions 4.1 Start CNM Program 4.2 Functional Layout Figure 4.3 A Topology Frame Figure 4.4 Tree view of the network topology 4.3 General Settings for CNM 4.3.1 Topology Add Switch Figure 4.6 Add Switch (GigaX 1024P) Figure 4.6.1 Add Switch (GigaX 1024I) 4.3.2 Setup 4.4 Switch Topology 4.4.1 Topology Discovery 4.4.2 Switch Add and Removal 4.4.3 Topology Load and Save 4.5 Switch Setup 4.6 System 4.6.1 Reboot 4.6.2 Link Status Reload 4.6.3 Change Password 4.6.4 Load 4.6.5 Save 4.6.6 Apply and Save 4.7 Configuration 4.7.1 Physical Interface Figure 4.18.1 Physical Interface (GigaX 1024I) Config Reload 4.7.2 Link Aggregation Trunking Status 4.7.3 Bandwidth Page 4.7.4 Traffic Control 4.7.5 VLAN Setup Page Control Option Figure 4.22 VLAN Control Options 4.7.6 IGMP Snooping 4.7.7 QoS Setup Page 4.8 Statistics 4.8.1 Port Traffic Setup Draw Traffic Chart 4.8.2 Traffic History 4.8.3 Comparison