5.IEEE 1394a port connector (10-1 pin IE1394_2)

This connector is for a IEEE 1394a port. Connect the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis.

STRIKER II FORMULA

GND +12V -TPB1 GND -TPA1

IE1394_2

PIN 1

 

 

 

 

 

 

 

 

GND

+12V

 

 

 

TPB1+ TPA1+

STRIKER II FORMULA IEEE 1394a connector

Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the motherboard!

You can connect the 1394 cable to ASUS Q-Connector (1394, red) first, and then install the Q-Connector (1394) to the 1394 connector onboard.

6.Thermal sensor cable connectors (2-pin OPT_TEMP1/2/3)

These connectors are for temperature monitoring. Connect the thermal sensor cables to these connectors and place the other ends to the devices which you want to monitor temperature. The optional fan1/2/3 can work with the temperature sensors for a better cooling effect.

OPT_TEMP1

Temperature Ground

OPT_TEMP2

STRIKER II FORMULA

OPT_TEMP3

 

STRIKER II FORMULA

Thermal sensor cable connectors

Temperature

Ground

Ground

Temperature

Enable OPT1/2/3 Cable Overheat Protection in BIOS if you connect thermal sensor cables to these connectors. Refer to page 4-38 for details.

The thermal sensor cable is purchased separately.

ROG Striker II Formula

2-35