1.4.2Memory configurations
You may install 512MB, 1GB, 2GB, and 4GB unbuffered non‑ECC DDR3 DIMMs into the DIMM sockets.
• We recommend that you install the memory modules from the blue slots for better overclocking capability.
•Due to the memory address limitation on
-Use a maximum of 3GB system memory if you are using a
-Install a
•This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less.
• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the
•For system stability, use a more efficient memory cooling system to support a full memory load (2 DIMMs) or overclocking condition.
E45M1-I DELUXE Motherboard Qualified Vendors Lists (QVL)
DDR3-1066 MHz capability
Vendors | Part No. | Size | SS/ | Chip | Chip NO. | Timing | Voltage | DIMM socket support | |
(Optional) | |||||||||
|
|
| DS | Brand |
|
|
| 1 DIMM | 2 DIMM |
Crucial | CT12864BA1067.8FF | 1GB | SS | Micron | 9GF22D9KPT | 7 | - | • | • |
Crucial | CT25664BA1067.16FF | 2GB | DS | Micron | 9HF22D9KPT | 7 | - | • | • |
ELPIDA | 1GB | SS | ELPIDA | - | 1.35V(low voltage) | • | • | ||
ELPIDA | 2GB | DS | ELPIDA | - | 1.35V(low voltage) | • | • | ||
KINGSTON | KVR1066D3N7/1G(矮版) | 1GB | SS | ELPIDA | 7 | 1.5V | • | • | |
KINGSTON | KVR1066D3N7/2G | 2GB | DS | ELPIDA | 7 | 1.5V | • | • | |
KINGSTON | KVR1066D3N7/4G | 4GB | DS | Hynix | H5TQ2G83AFR | 7 | 1.5V | • | • |
Micron | 1GB | SS | Micron | 9GF22D9KPT | 7 | - | • | • | |
Micron | 2GB | DS | Micron | 9HF22D9KPT | 7 | - | • | • | |
Kingtiger | 2GB DIMM | 2GB | DS | Hynix | H5TQ1G83AFP G7C | - | - | • | • |
ASUS |