8.USB 3.0 connector (20-1 pin USB3_34)

This connector is for the additional USB 3.0 ports. Connect the bundled USB 3.0 bracket cable to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your chassis support customised front panel installation, with ASUS USB 3.0 header, you can have a front panel USB 3.0 solution.

E35M1-I DELUXE

E45M1-I DELUXE USB3.0 front panel connector9.USB 2.0 connectors (10-1 pin USB56, USB78)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

480 Mbps connection speed.

 

USB+5V USB P8- USB P8+

GND NC

USB781

 

 

PIN

USB+5V USB P7- USB P7+

GND

E35M1-IDELUXE

USB+5V USB P6- USB P6+

GND NC

USB561

 

 

PIN

USB+5V USB P5- USB P5+

GND

E45M1-I DELUXE USB2.0 connectors

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB module cable is purchased separately.

Chapter 1: Product introduction

1-15