![](/images/backgrounds/166519/166519-16545x1.png)
7.Front panel audio connector
This connector is for a
AGND NC SENSE1 RETUR | SENSE2 RETUR | AGND NC NC | NC |
AAFP |
|
PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L | PIN 1 |
MIC2 MICPWR Line out_R NC Line out_L | |
| |
Legacy AC’97 | |
pin definition | compliant definition |
• We recommend that you connect a
• If you want to connect a high definition front panel audio module to this connector, set the Front Panel Type item in the BIOS to [HD]. See section 3.5.5 Onboard Devices Configuration for details.
• The front panel audio I/O module is purchased separately.
8. USB 3.0 connector
This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your chassis support customized front panel installation, with ASUS USB 3.0 header, you can have a front panel USB 3.0 solution.
USB3_34
The USB 3.0 module is purchased separately.
Chapter 1