3 Chapter

USB Support [Partial In...]

[Disabled]

All the USB devices will be available only afater entering the operating

 

system (OS).

[Full Initial]

All the USB devices will be available during POST and in OS.

[Partial Initial]

Specific USB device / port will be available before entering OS.

PS2 Devices Support [Enabled]

This item allows you to set the PS/2 devices support. Configuration options: [Auto] [Enabled].

Network Stack Driver Support [Disabled]

[Disabled]

Disables network stack driver support during POST.

[Enabled]

Enables network stack driver support during POST.

3.7.4Post Logo Delay Time [3 sec]

Allows you to set the Post Logo Delay Time. Configuration options: [0 sec] [1 sec] ~ [10 sec].

3.7.5Wait for ‘F1’ If Error [Enabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled]

3.7.6DirectKey Enable [Go to BIOS...]

[Disabled]

Disables the DirectKey function.

[Go to BIOS Setup]

Allows the system to power on and go to BIOS setup directly

 

when you press the DirectKey button.

3.7.7Option ROM Messages [Force BIOS]

[Force BIOS]

The third-party ROM messages will be forced to display during the boot

 

sequence.

[Keep Current]

The third-party ROM messages will be displayed only if the third-party

 

manufacturer had set the add-on device to do so.

3.7.8Next boot after AC Power Loss [Normal Boot]

[Normal Boot]

Returns to normal boot up process after AC Power Loss.

[Fast Boot]

Accelerates the boot up speed after AC Power Loss.

3.7.9CSM Parameters

This option allows you to control the CSM launch parmeters.

Launch CSM [Enabled]

Configuration option: [Auto] [Enabled] [Disabled]

The following four items appear when Launch CSM is set to [Enabled].

Boot option filter [UEFI and L...]

Configuration option: [UEFI and Legacy] [Legacy only] [UEFI only]

3-24

Chapter 3: BIOS setup