9.USB 2.0 connectors (10-1 pin USB34, USB56, USB78, USB910)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

480Mbps connection speed.

F2A85-M PRO

USB910

 

 

 

 

 

 

 

USB+5V USB P10- USB P10+

GND NC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PIN 1

USB+5V USB_P9- USB_P9+

GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB78

 

 

USB+5V USB_P8- USB_P8+

GND NC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PIN 1

USB+5V USB P7- USB P7+

GND

 

 

USB56

 

 

USB+5V USB_P6- USB_P6+

GND NC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PIN 1

USB+5V USB P5- USB P5+

GND

 

 

USB34

 

 

USB+5V USB_P4- USB_P4+

GND NC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PIN 1

USB+5V USB P3- USB P3+

GND

 

 

F2A85-M PRO USB2.0 connectors

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB 2.0 module is purchased separately.

10.Direct connector (2-pin DRCT)

This connector is for the chassis-mounted button that supports the DirectKey function. Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard.

1 Chapter

F2A85-M PRO

F2A85-M PRO DRCT connector

Ensure that your chassis comes with the button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details.

1-30

Chapter 1: Product introduction