3 Chapter
Asmedia USB 3.0 Battery Charging Support [Enabled]
This item appears only when the Asmedia USB 3.0 Controller item is set to [Enabled].
[Enabled] | Enables the Asmedia USB 3.0 battery charging function. |
[Disabled] | Disables this function |
Serial Port Configuration
The
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).
Configuration options: [Enabled] [Disabled]
Change Settings [IO=3F8h; IRQ=4]
Allows you to select the Serial Port base address.
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
3.5.6APM
Restore AC Power Loss [Power Off]
[Power On] | The system goes into on state after an AC power loss. |
[Power Off] | The system goes into off state after an AC power loss. |
[Last State] | The system goes into either off or on state, whatever the system state was |
| before the AC power loss. |
Power On By PS/2 Keyboard [Disabled]
[Disabled] | Disables the Power On by a PS/2 keyboard. |
[Space Bar] | Sets the Space Bar on the PS/2 keyboard to turn on the system. |
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system. | |
[Power Key] | Sets Power key on the PS/2 keyboard to turn on the system. This feature |
| requires an ATX power supply that provides at least 1A on the +5VSB lead. |
Power On By PS/2 Mouse [Disabled]
[Disabled] | Disables the Power On by a PS/2 mouse. |
[Enabled] | Enables the Power On by a PS/2 mouse. This feature requires an ATX |
| power supply that provides at least 1A on the +5VSB lead. |
Power On By PME [Disabled]
[Disabled] | Disables the PME to wake up by PCI/PCIE devices. |
[Enabled] | Allows you to turn on the system through a PCI/PCIE LAN or modem card. |
| This feature requires an ATX power supply that provides at least 1A on the |
| +5VSB lead. |
Power On By Ring [Disabled]
[Disabled] | Disables Ring to generate a wake event. |
[Enabled] | Enables Ring to generate a wake event. |
Chapter 3: BIOS setup |