Asus 2.7.1Fast Boot [Enabled], 2.7.2Full Screen Logo [Enabled]

2.7.1Fast Boot [Enabled]

[Enabled]	Select to accelerate the boot speed.
[Disabled]	Select to go back to normal boot.
	The following four items appear when you set Fast Boot to [Enabled].

USB Support [Partial Initialization]

[Disabled]	All USB devices will not be available until OS boot up for a
	fastest POST time.
[Full Initialization]	All USB devices will be available during POST. This process will
	extend the POST time.
[Partial Initialization]	For a faster POST time, only the USB ports with keyboard and
	mouse connections will be detected.

PS/2 Keyboard and Mouse Support [Auto]

Select any of these settings when PS/2 keyboard and mouse are installed. These settings only apply when Fast Boot is enabled.

[Auto]	For a faster POST time, PS/2 devices will only be available when the
	system boots up or rebooted when the PS/2 devices have not been
	reconnected or changed. If you disconnect or change PS/2 devices before
	restarting the system, PS/2 devices will not be available and BIOS setup
	program will not be accessible via PS/2 devices.

[Full Initialization] For full system control, PS/2 devices will be available during POST at any circumstances. This process will extend POST time.

[Disabled]	For the fastest POST time, all PS/2 devices will not be available until your
	computer enters the operating system.

Network Stack Driver Support [Disabled]

[Disabled]	Select to skip the network stack driver from loading during POST.
[Enabled]	Select to load the network stack driver during POST.

Next Boot after AC Power Loss [Normal Boot]

[Normal Boot]	Returns to normal boot on the next boot after AC power loss.
[Fast Boot]	Accelerates the boot speed on the next boot after AC power loss.

2.7.2Full Screen Logo [Enabled]

[Enabled]	Enables the full screen logo display feature.
[Disabled]	Disables the full screen logo display feature.
	Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.

2-28 Chapter 2: Getting started