7.USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices.

8.USB 3.0 ports 1 and 2. These two 9-pin Universal Serial Bus (USB) ports are for USB 3.0 devices (available on H61M-PLUS & H61M-A/USB3 only).

These two ports are USB 2.0 3 and 4 in H61M-A.

9.HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.

10.DVI-D port. This port is for any DVI-D compatible device. DVI-D can’t be converted to output RGB Signal to CRT and isn’t compatible with DVI-I.

11.PS/2 Keyboard port. This port connects to a PS/2 keyboard.

1.8.2Internal connectors

1.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

AGND NC SENSE1 RETUR

SENSE2 RETUR

AGND NC NC

NC

AAFP

 

PIN 1

SENSESEND PORT2 L

PORT1 L PORT1 R PORT2 R

H61M-PLUS

 

HD-audio-compliant

pin definition

PIN 1

Line out_L

NC

Line out_R

MICPWR

MIC2

Legacy AC’97

compliant definition

H61M-PLUS Front panel audio connector

• We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.

If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD]. See section 2.5.6 Onboard Devices Configuration for details.

1-22

Chapter 1: Product introduction