5.CPU and chassis fan connectors
Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
CPU_FAN CHA_FAN
CPU FAN PWM CPU FAN IN CPU FAN PWR GND | CHA FAN PWM CHA FAN IN CHA FAN PWR GND |
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors!
The two fan connectors support fans of maximum 2A (24 W) fan power.
6.USB connectors
These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
USB56 USB78 USB910
USB+5V USB P6- USB P6+ | GND NC | USB+5V USB P8- USB P8+ | GND NC | USB+5V USB P10- USB P10+ | GND NC | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PIN 1 |
|
|
|
|
|
| PIN 1 |
|
|
|
|
|
| PIN 1 |
|
|
|
|
|
USB+5V USB P5- USB P5+ | GND | USB+5V USB P7- USB P7+ | GND | USB+5V USB P9- USB P9+ | GND | ||||||||||||||
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB module cable is purchased separately.
Chapter 1: Product introduction |