Asus H87M-PRO manual Bootup NumLock State On, Wait For ‘F1’ If Error Enabled, Setup Mode EZ Mode

Bootup NumLock State [On]

[On]	Set the power-on state of the NumLock to [On].
[Off]	Set the power-on state of the NumLock to [Off].

Wait For ‘F1’ If Error [Enabled]

[Disabled]	Disables the function.
[Enabled]	The system waits for the <F1> key to be pressed when error occurs.

Option ROM Messages [Force BIOS]

[Force BIOS]	The third-party ROM messages will be displayed during the boot sequence.
[Keep Current]	The third-party ROM messages will be displayed only if the third-party
	manufacturer had set the add-on device to do so.

Interrupt 19 Capture [Disabled]

[Enabled]	Allows the option ROMs to trap Interrupt 19.
[Disabled]	Disables this function.

Setup Mode [EZ Mode]

[Advanced Mode]	Allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]	Allows you to go to EZ Mode of the BIOS after POST.

CSM (Compatibility Support Module)

Allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility.

Launch CSM [Enabled]

[Auto]	The system automatically detects the bootable devices and the add-
	on devices.
[Enabled]	For better compatibility, enable the CSM to fully support the non-UEFI
	driver add-on devices or the Windows® UEFI mode.
[Disabled]	Disable the CSM to fully support the Windows® Security Update and
	Security Boot.

Chapter 3

3-42

The following four items appear when you set Launch CSM to [Enabled].

Boot Devices Control [UEFI and Legacy OpROM]

Allows you to select the type of devices that you want to boot. Configuration options: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only]

Boot from Network Devices [Legacy OpROM first]

Allows you to select the type of network devices that you want to launch. Configuration options: [Legacy OpROM first] [UEFI driver first] [Ignore]

Boot from Storage Devices [Legacy OpROM first]

Allows you to select the type of storage devices that you want to launch. Configuration options: [Both, Legacy OpROM first] [Both, UEFI first] [Legacy OpROM first] [UEFI driver first] [Ignore]

Boot from PCIe/PCI Expansion Devices [Legacy OpROM first]

Allows you to select the type of PCIe/PCI expansion devices that you want to launch. Configuration options: [Legacy OpROM first] [UEFI driver first]

Chapter 3: BIOS setup