3. HARDWARE SETUP
External Frequency Table| CPU | SDRAM | Frequency Selection Switches | |
| (MHz) | (MHz) | 1 | 2 |
100.00 | 100.00 | [ O N ] | [ O N ] |
103.00 | 103.00 | [OFF] | [ O N ] |
105.00 | 105.00 | [ O N ] | [OFF] |
110.00 | 110.00 | [OFF] | [OFF] |
|
|
|
|
NOTE: For updated processor settings, visit the ASUS web site (see ASUS CON-
TACT INFORMATION)WARNING! Premature wearing of the processor may result when overclocking. Be sure that the DIMM you use can handle the specified SDRAM MHz or else bootup will not be possible.
6)Voltage Regulator Output Setting (VID1, VID2, VID3)This jumpers allow you to manually adjust the CPU core voltage. It is recom- mended to use CPU Default as the CPU core voltage. CPU Default means the Vcore is generated according to the CPU VID configuration. For each jumper setting, there are two voltage options, depending on the CPU used.
Motherboard Settings
3. H/W SETUP
K7M
K7M CPU Core Voltage Selection
1 2 3 4 | 1 2 3 4 | 1 2 3 4 |
VID1 |
|
|
VID2 |
|
|
VID3 |
|
|
2/2.05Volts | 1.9/1.95Volts | 1.8/1.85Volts |
1 2 3 4 | 1 2 3 4 | 1 2 3 4 |
VID1 |
|
|
VID2 |
|
|
VID3 |
|
|
1.7/1.75Volts | 1.6/1.65Volts | 1.5/1.55Volts |
1 2 3 4 | 1 2 3 4 | 1 2 3 4 |
VID1 |
|
|
VID2 |
|
|
VID3 |
|
|
1.4/1.45Volts | 1.3/1.35olts | CPU Default |
ASUS K7M User’s Manual | 21 |