Memory Configuration
The Memory Configuration menu items allow you to change the related memory settings. Select an item then press <Enter> to display the
Memory Configuration |
|
Memclock Mode | [Auto] |
MCT Timing Mode | [Auto] |
User Config Mode | [Auto] |
Burst Length | [4 Beats] |
Software Memory Hole | [Enabled] |
MEMCLK can be set by the code using AUTO, or if you use LIMIT, you can set one of the standard values.
Memclock mode [Auto]
This item allows you to set the memory clock mode. Set by the code using [Auto] or select [Limit] to set using one of the standard values. If select [Limit], the
MCT Timing Mode [Auto]
Configuration options: [Auto] [Manual].
User Config Mode [Auto]
Configuration options: [Auto] [Manual].
Burst Length [4 Beats]
Configuration options: [8 Beats] [4 Beats] [2 Beats].
Software Memory Hole [Enabled]
Configuration options: [Disabled] [Enabled].
Memory CLK [200MHz]
Configuration options: [200MHz].
CAS Latency [2.5]
This item allows you to set the CAS Latency. Configuration options: [Auto] [2.0] [3.0] [2.5].
ASUS |