depends on the number of hard disk drives installed in the system. Configuration options: [xxxxx Drive] [Disabled]

2.6.3 Boot Settings Configuration

Boot Settings Configuration

 

Allows BIOS to skip

 

 

certain tests while

Quick Boot

[Enabled]

booting. This will

Full Screen Logo

[Enabled]

decrease the time

AddOn ROM Display Mode

[Force BIOS]

needed to boot the

Bootup Num-Lock

[On]

system.

PS/2 Mouse Support

[Auto]

 

Wait for ‘F1’ If Error

[Enabled]

 

Hit ‘DEL’ Message Display

[Enabled]

 

Interrupt 19 Capture

[Disabled]

 

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some Power On Self Tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Configuration options: [Disabled] [Enabled].

Full Screen Logo [Enabled]

Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled].

Make sure that the above item is set to [Enabled] if you wish to use the ASUS MyLogo feature.

Add On ROM Display Mode [Force BIOS]

Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current].

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On].

PS/2 Mouse Support [Auto]

Allows you to enable or disable support for PS/2 mouse. Configuration options: [Disabled] [Enabled] [Auto].

Wait for ʻF1ʼ If Error [Enabled]

When set to Enabled, the system waits for F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled].

Hit ʻDELʼ Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled].

ASUS K8U-X Motherboard

2-29