3.4 Creating a RAID Driver Disk

To create a RAID driver disk:

1.Insert the motherboard support CD into the CD-ROM drive and locate the Makedisk.exe utility for your RAID controller. The Makedisk.exe utility for the RAID driver is located in \Drivers\RAID\Makedisk.exe” of the motherboard support CD.

2.Insert a clean floppy disk into the floppy disk drive and execute Makedisk.exe. Follow succeeding screen instructions to complete the process.

3.Write-protect the floppy disk to avoid computer virus infection.

To create a RAID driver disk:

1.During the OS installation, the system prompts to press the F6 key to install third-party SCSI or RAID driver.

2.Press <F6> then insert the floppy disk with RAID driver into the floppy disk drive.

3.Follow the succeeding screen instructions to complete the installation.

For additional information on RAID installation and configuration, refer to the readme file which is located in [Drivers\RAID\Readme.txt] in support CD.

3-8

Chapter 3: Software Support